Description
# Poly Chain® GT™ Carbon™ Idler Sprocket
Idlers are used to take-up extra belt length and provide adjustment for tensioning belt drives. Idler pulleys and sprockets can alter belt paths and clear obstructions.
– Idler assembly may consist of: idler sprocket and bracket, flat idler and bracket, standard sheave or sprocket used with an idler bearing and idler bracket.
– Idler sprockets, flat idlers and idler bushings contain sealed ball bearings and an integral shaft for mounting to adjustable idler brackets.
– Lubrication and maintenance are not required.
Additional information
| Bearing No. | 6310 |
|---|---|
| Belt Width (in) | 3.54 |
| Belt Width (mm) | 90 |
| F Threads (in) | 1 – 14 |
| Number of Teeth | 34 |
| Thread Size | 1-14 |
| B (in) | 3.38 |
| C (in) | 0.31 |
| D (in) | 4.2 |
| E (in) | 2.25 |
| G (in) | 1 |
| H (in) | 4.88 |
| Width (mm) | 90 |
| Markets/Applications | Recommended for drives with limited take-up or no center distance adjustment. Idlers may remain in a fixed location or may be adjustable to allow belt pre-tension take-up. |
| Customer Pack | 1 |
| Weight (lbs.) | 32.18 |
| J (in) | 4.34 |
