6PM4010
Description
# Plant Master™ Plus Hose
RECOMMENDED FOR: Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only.
– ARPM (Class B) Medium oil–resistant tube.
– ARPM (Class C) Limited oil–resistant cover.
– Air, water, and heat resistant.
## Features and Benefits
– Working pressure: 1,72 to 1,38 MPa
– Design factor: 3:1
– Sizes: 1/4″ to 2″
– Formerly: Duro Flex™
Additional information
| Vacuum (In. Hg) | 30 |
|---|---|
| Minimum Bend Radius (in) | 3 |
| Minimum Bend Radius (mm) | 76 |
| Inside Diameter (in) | 0.38 |
| Inside Diameter (mm) | 9.5 |
| Temperature Range | -40°F to +200°F (-40°C to +93°C), -20°F to +212°F (-29°C to +100°C) |
| Working Pressure (psi) | 250 |
| Length (m) | 152.4 |
| Outside Diameter (in) | 0.66 |
| Outside Diameter (mm) | 9.5 |
| Coupling Recommendation | Power Crimp™ Couplings. GLX® Couplings [G44 Series]., 19 Standard Air Hose. 1 Long Shank. 3 Cast Brass or Zinc Short Shank. 4 Machined Brass Short Shank. Power Crimp™ Couplings., GLX® Couplings [G44 Series]. Field Attachable LOC Couplings [G36 Series]., Power Crimp™ Couplings, GLX® Couplings [G44 Series], Power Crimp™ Couplings. GLX® Couplings [G44 Series] |
| Color | Red |
| Cover | EPDM – Type P., EPDM – Type P. Perforated., Modified Nitrile – Type C2., Chloroprene – Type A., EPDM – Type P |
| Reinforcement | Synthetic textile |
| Tube | Specially compounded elastomer – Type B1. Medium oil resistance. |
| Construction: Cover | EPDM – Type P |
| Construction: Design Factor | 3:1, 4:1 |
| Construction: Reinforcement | Synthetic textile |
| Construction: Tube | Specially compounded elastomer – Type B1. Black. Medium oil resistance, EPDM – Type P. Black. Limited oil resistance, Nitrile – Type C. Black. High oil resistance |
| Standards: Cover | ARPM Class C |
| Standards: Tube | ARPM Class B |
| Continuous Operating Temperature Range | -40°F to +200°F |
| Min. Burst Pressure (psi) | 750 |
| Hose Inside Diameter (in). | 0.38 |
| Hose Inside Diameter (mm) | 9.5 |
| Hose Outside Diameter (in) | 0.66 |
| Hose Outside Diameter (mm) | 16.8 |
| Use | Industrial Hose |
| Notes | NOTE: Pkg Code T = One piece continuous length reel. Pkg Code XX = Two piece reel, 50 ft increments, no length less than 50 ft. |
| Recommended For | Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only. |
| Customer Pack | 500 |
| Weight (lbs.) | 0.14 |
| Standards | Non-conductive (>1 Megohm/in.). Storage and use may adversely affect electrical resistance. |
| Caution | Hose is not recommended for applications where vibrations or pressure surges exist. Do not use oil for Lock-On fitting insertion purposes. Not recommended for gasoline or diesel fuels. |
