4X100FT BLACK GOLD OILFIELD SERVICE 400D AR TL
Description
# Black Gold™ Oilfield Service
RECOMMENDED FOR: Heavy–duty suction and discharge applications handling crude oil, salt and fresh water, tank sediments, drilling mud and mild chemicals for oilfield applications such as frac tank connections.
– CAUTION: Do not convey fuels over +120°F (+49°C).
– Service life of transfer hoses can be extended by draining hoses after use.
– ARPM (Class A) High oil–resistant tube.
Additional information
| Vacuum (In. Hg) | 10 – 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 15 – 41 |
| Minimum Bend Radius (mm) | 381 – 1041.4 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 2 – 4 |
| Hose Inside Diameter (mm) | 50.8 – 101.6 |
| Hose Outside Diameter (in) | 2.84 – 4.99 |
| Hose Outside Diameter (mm) | 72.1 – 126.7 |
| Inside Diameter (in) | 2 – 4 |
| Inside Diameter (mm) | 50.8 – 101.6 |
| Working Pressure (psi) | 400 |
| Length (m) | 30.5 – 61 |
| Outside Diameter (in) | 2.84 – 5.14 |
| Outside Diameter (mm) | 50.8 – 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, dual wire helix, Multi-ply, synthetic textile, static filament |
| Tube | Nitrile – Type C. High oil resistance. |
| Construction: Cover | Chloroprene – Type A, Carboxylated Nitrile – Type C4, Ultra High Molecular Weight Polyethylene – Type L |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely light-weight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses., Transfer of water, petroleum-based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio-Diesel and other alternative fuel applications, see Fuel Master® XTreme™. Petroleum transfer hoses may be used with all grades of Bio-Diesel only if the exposure is intermittent and the hose is drained between uses. |
| Caution | Do not convey fuels over +120°F (+49°C). |
| Customer Pack | 200 |
| Weight (lbs.) | 2.03 – 4.64 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Coupling Recommendation | 71 Permanent Swaged or Crimped, 14 Interlocking, Ground Joint. 15 Interlocking, Washer Joint. 71 Permanent Swaged or Crimped. |
| Cover | Carboxylated Nitrile – Type C4. Wrapped., Ultra High Molecular Weight Polyethylene – Type L. Wrapped. |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, static filament, Multi-ply, synthetic textile, dual wire helix |
| Construction: Tube | Nitrile – Type C. Black. High oil resistance |