Description
# Black Gold™ Oilfield Frac
RECOMMENDED FOR: Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving suction and discharge service for diesel oils and other similar
petroleum products where an extremely light–weight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.
– CAUTION: Do not convey fuels over +120°F (+49°C).
– UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer.
– ARPM (Class A) High oil–resistant tube.
Additional information
| Vacuum (In. Hg) | 10 – 30 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +180°F |
| Minimum Bend Radius (in) | 25 – 38 |
| Minimum Bend Radius (mm) | 635 – 965 |
| Min. Burst Pressure (psi) | 1600 |
| Hose Inside Diameter (in). | 4 |
| Hose Inside Diameter (mm) | 101.6 |
| Hose Outside Diameter (in) | 4.78 |
| Hose Outside Diameter (mm) | 121.4 |
| Inside Diameter (in) | 4 |
| Inside Diameter (mm) | 101.6 |
| Working Pressure (psi) | 400 |
| Length (m) | 30.5 – 61 |
| Outside Diameter (in) | 4.78 – 5.10 |
| Outside Diameter (mm) | 101.6 |
| Color | Black |
| Reinforcement | Multi-ply, synthetic textile, static filament, Multi-ply, synthetic textile, dual wire helix |
| Tube | Nitrile – Type C. High oil resistance. |
| Construction: Cover | SBR – Type D, Chloroprene – Type A |
| Standards | Gates proprietary design. |
| Standards: Cover | ARPM Class C |
| Standards: Tube | ARPM Class A |
| Recommended For | Transfer of abrasive slurries used in oil and gas well stimulation and fracking, high-pressure water applications., Heavy-duty, rugged hose that can serve applications such as transfer of hydraulic fracturing fluids, abrasive slurries and high pressure water applications in oil and gas well stimulation and fracking. Can handle waste water that has gas or petroleum impurities. |
| Customer Pack | 100 – 200 |
| Weight (lbs.) | 2.81 – 3.92 |
| Temperature Range | -40°F to +180°F (-40°C to +82°C) |
| Coupling Recommendation | 14 Interlocking, Ground Joint. 15 Interlocking, Washer Joint. 71 Permanent Swaged or Crimped. |
| Cover | Chloroprene – Type A. Wrapped. |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile, static filament |
| Construction: Tube | Nitrile – Type C. Black. High oil resistance |
