4219BF Barricade™ GreenShield™ Fuel Hose
Description
# 4219BF Barricade™ GreenShield™ Fuel Hose
RECOMMENDED FOR: Low-permeation fuel injection line including gasoline, ethanol blends, 100% methanol (no blends), diesel, biodiesel (including all blends of SME, RME or PME). Not for in-tank or gaseous fuels.
– CAUTION: Not for in–tank or gaseous fuels.
– Exceeds SAE J30R14T2+ (except kink).
– Meets Caterpillar CAT 1E4340 (Type A and B) diesel and Bio–Diesel specification.
– Fuel resistant, synthetic rubber with thermoplastic barrier tube.
## PATENTED GREENSHIELD™ TECHNOLOGY
Our five-layer Greenshield™ Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.
1. Barrier tube – provides high heat and corrosive liquid resistance.
2. Greenshield™ barrier – patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer – secondary protective barrier.
4. Reinforcement layer – spiral textile reinforcement provide strength and pressure resistance.
5. Cover – protect underlying components.
## Features and Benefits
– Standard: SAE 30R14 T2 except no kink test and higher burst (<15g/m²/day) for spark ignition engines.
– All elastomeric rubber compound provides oil and heat resistance.
– Not for in-tank or gaseous fuels.
– Max working pressure: 225 psi.
– Working pressure: 1,55 MPa.
– Multi-fuel compatibility.
– Barrier: Thermoplastic liner.
– Design factor: 5:1.
– Size: 3/16" to 1/2".
## MULTI-FUEL COMPATIBLE
Barricade™ Fuel Injection Hose provides a versatile solution in OE-quality aftermarket fuel hose. The Barricade™ Fuel Injection Hose is approved for use with: unleaded gasoline, diesel, biodiesel (up to B100 [SME, PME, RME], max temp +100°C; +212°F), methanol, ethanol (E10, E15, E85), and gasohol fuels.
Additional information
| Vacuum (In. Hg) | 10 – 24 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +275°F, -40°F to +302°F |
| Minimum Bend Radius (in) | 2.95 – 6 |
| Minimum Bend Radius (mm) | 65 – 140 |
| Min. Burst Pressure (psi) | 1160 |
| Hose Inside Diameter (in). | 0.25 – 0.5 |
| Hose Inside Diameter (mm) | 6.4 – 12.7 |
| Hose Outside Diameter (in) | 0.5 – 0.78 |
| Hose Outside Diameter (mm) | 12.7 – 19.8 |
| Inside Diameter (in) | 0.25 – 0.5 |
| Inside Diameter (mm) | 6.4 – 12.7 |
| Working Pressure (psi) | 225 |
| Length (m) | 167.6 |
| Outside Diameter (in) | 0.5 – 0.78 |
| Outside Diameter (mm) | 6.4 – 12.7 |
| Color | Black |
| Reinforcement | Synthetic textile |
| Tube | HNBR – Type C1. High oil resistance. |
| Construction: Cover | CPE – Type J |
| Standard Industry Specification | SAE J30R12, SAE J30R14 |
| Meets These Agency Specifications | SAE – Society of Automotive Engineers |
| Recommended For | Any fuel injected engine application (1985 and newer) in cars, light trucks, off-road vehicles and small engines where a barrier fuel hose is required. Gasoline, Gasoline/Ethanol (E10, E15, E85), 100% Methanol only (Methanol blends not recommended). Diesel, Diesel/Bio-Diesel blends, 100% Bio-Diesel (SME, RME, and PME Bio-Diesels are acceptable). |
| Customer Pack | 550 |
| Weight (lbs.) | 0.1 – 0.19 |
