Categories
32PCBHB1F
Description
# LP350 Power Crimp™ Ferrules
Power Crimp stems and ferrules are designed for use with your Gates hoses with a wide variety of couplings available for easy installation.
– Designed to perform with high and medium pressure hose.
– Sizes 3/16 in. through 2 in. I.D.
– Zinc plated carbon steel.
Additional information
| Material | Steel |
|---|---|
| Standards | CAN/CGA-8.1-M86. NFPA 58, Section 8-3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes). |
| Notes | NOTE: These ferrules are to be used with LP350 hose only. |
| Recommended For | Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). |
| Customer Pack | 1 |
| Weight (lbs.) | 1.72 |