27008
Description
# PCV/EEC Fuel Hose
RECOMMENDED FOR: Use in fuel, oil, coolant, water and alcohol lines requiring MIL–DTL–6000.
– CAUTION: This product is not intended or designed for use in any manned, rotor, or fixed–wing aircraft, even on an emergency or temporary basis.
– Meets MIL–DTL–6000; QPL–6000–16. Test reference MOAMA (MONEB).
– High oil resistance.
## Features and Benefits
– Vacuum rating of 24 In./Hg for sizes less than 1⁄2″ I.D., and 10 In./Hg for sizes 1⁄2″ to 3⁄4″ I.D. at ambient temperatures.
– Meets requirements of SAE J30R7 and DIN 73379 (except for tolerances).
– Nitrile Tube and Modified Nitrile Cover.
– Synthetic Fiber Reinforcement.
– Cover resists heat, oil, ozone and weathering.
– Available in 2ft, 25ft, or 250ft Lengths.
Additional information
| Minimum Bend Radius (in) | 3 – 36 |
|---|---|
| Minimum Bend Radius (mm) | 76 – 914 |
| Inside Diameter (in) | 0.25 – 3 |
| Inside Diameter (mm) | 6.4 – 76.2 |
| Temperature Range | -40°F to +250°F (-40°C to +121°C), -40°F to +257°F (-40°C to +125°C) with gasoline blends. |
| Working Pressure (psi) | 35 |
| Length (m) | 3 – 15 |
| Outside Diameter (in) | 0.94 |
| Outside Diameter (mm) | 24 |
| Coupling Recommendation | 19 Standard Air Hose. 21 Preformed Band Clamps. 48 Band-It Nipples. |
| Color | Black |
| Cover | Chloroprene – Type A. Smooth. |
| Reinforcement | Braided, synthetic textile |
| Tube | Chloroprene – Type A. High oil resistance. |
| Construction: Cover | Chloroprene – Type A |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Braided, synthetic textile |
| Construction: Tube | Chloroprene – Type A. Black. High oil resistance |
| Vacuum (In. Hg) | 10 |
| Centerline Length (ft) | 25 |
| Centerline Length (in) | 36 |
| Centerline Length (m) | 7.62 |
| Centerline Length (mm) | 914 |
| Hose Inside Diameter (in). | 0.625 |
| Hose Inside Diameter (mm) | 15.9 |
| type | Fuel Line/PCV/EEC Hose |
| Caution | Do not use for pressure lines on fuel injected engines or for cooling system applications. Use Barricade® Fuel Injection hose for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15% by volume. |
| Customer Pack | 1 |
| Weight (lbs.) | 6.08 |
| Inside Diameter 1 (in) | 0.625 |
| Inside Diameter 1 (mm) | 15.9 |
| Inside Diameter 2 (in) | 0.625 |
| Inside Diameter 2 (mm) | 15.9 |
| Outside Diameter 1 (mm) | 7.5 – 16.25 |
| Max. Working Pressure (Bar) | 7.5 |
