2517-IDLR-BUSH
Description
# Idler Brackets
Idlers are used to take-up extra belt length and provide adjustment for tensioning belt drives. Idler pulleys and sprockets can alter belt paths and clear obstructions.
– Idler assembly may consist of: idler sprocket and bracket, flat idler and bracket, standard sheave or sprocket used with an idler bearing and idler bracket.
– Idler sprockets, flat idlers and idler bushings contain sealed ball bearings and an integral shaft for mounting to adjustable idler brackets.
– Lubrication and maintenance are not required.
Additional information
| Belt Width (in) | 4.63 – 6.94 |
|---|---|
| Belt Width (mm) | 117.6 – 176.3 |
| Thread Size | 3/4-16, 1-14 |
| A (in) | 4.62 – 6.94 |
| B (in) | 3.5 – 5.25 |
| C (in) | 1.75 – 2.63 |
| D (in) | 3.38 |
| E (in) | 2.06 – 3 |
| F (in) | 3.06 – 4.56 |
| G (in) | 0.38 – 0.63 |
| H (in) | 1.5 – 2.38 |
| J (in) | .62 – 1 |
| N (in) | 1 – 1.63 |
| P (in) | 1.77 – 2.94 |
| Q (in) | 1.75 – 2.75 |
| Markets/Applications | Recommended for drives with limited take-up or no center distance adjustment. Idlers may remain in a fixed location or may be adjustable to allow belt pre-tension take-up. |
| Material | Steel |
| Customer Pack | 1 |
| Weight (lbs.) | 3.9 |
| L (in) | 1.75 |
| M (in) | 1.56 |
| Notes | Bore/Bearing/Bushing # 6304 |
