03G3470
Description
# G-Force WorkHorse™ CVT Belts
Our newest Gates G-Force WorkHorse CVT belts, are engineered to handle the toughest tasks and trails.
– Up to 2x the life of the G-Force Belt.
– 45% increased heat tolerance.
– Power for hauling heavy loads across aggressive terrain
– Improved durability, crack & wear-resistance.
## DON’T BREAK YOUR BELT. BREAK IT IN.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.
1. Install the Right Belt. Using a belt that’s even slightly different than the OE specifications can affect performance – or stop you in your tracks.
2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.
3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at 80°F at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of 60°F or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
Additional information
| Angle. | 26 |
|---|---|
| Number of Ribs | 1 |
| Effective Length (in) | 253.5 |
| Outside Circumference (mm) | 911 |
| Effective Length (mm) | 6.439 |
| Section | 5VX, RVS-R, HC50, 3V, B, BB, +17 more |
| Outside Circumference (in) | 35.875 |
| Notched | true |
| Cross Section | E |
| Inside Circumference (in) | 250 |
| Inside Circumference (mm) | 6350 |
| Top Width (in) | 1.031 |
| Top Width (mm) | 26 |
| Thickness (in) | 0.91 |
| Thickness (mm) | 23 |
| Markets/Applications | Suitable for all industrial applications, including v-flat drives. |
| Color | Black |
| Construction | Banded |
| Material | Belt Material is SBR. Cord Material is Polyester |
| Recommended For | Multi-Duty® Sheaves |
| Belt Notes | Gates Hi-Power® belts are available in A, B, C, D and E cross sections. |
| Customer Pack | 1 |
| Weight (lbs.) | 15.84 |
| Belt Nominal E.L. (in) | 91.20 – 138.90 |
| Category | Classical Section Wrapped V-Belts |
| Top Width Per Strand (in) | 0.359 – 1.304 |
| Top Width Per Strand (mm) | 9 – 33 |
| Strand | 1 – 28 |
| Size Range/Availability | Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed. Large Inventory of standard lengths and widths are readily available. See sizing table for details. Made-To-Order Belt Lengths are available in any size from: 3V (45 to 220 inch), 5V (50 to 660 inch) and 8V (100 to 660 inch). Check with Customer Service for minimum order quantity and manufacturing lead time., Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed. Large Inventory of standard lengths and widths are readily available. See sizing table for details. Made-To-Order Belt Lengths are available in any size from: A (38 to 212 inch), B (35 to 663 inch), C (56 to 662 inch) and D (126 to 665 inch). Check with Customer Service for minimum order quantity and manufacturing lead time., Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed. Large Inventory of standard lengths and widths are readily available. See sizing table for details., Belt Slitters located onsite at several Gates Service Centers can cut down an existing belt in inventory to the strand width needed. Large Inventory of standard lengths and widths are readily available. See sizing table for details. Made-To-Order Belt Lengths are available in any size from: CP (80 to 400 inch), 3VP (45 to 220 inch), 5VP (50 to 660 inch) and 8VP (100 to 660 inch). Check with Customer Service for minimum order quantity and manufacturing lead time. |
| WARNING | Do NOT use with backside idlers. |
| Pitch Length (in) | 26.6 |
| Pitch Length (mm) | 676 |
| Inside Length (in) | 46 – 57 |