1.33PM1100
Description
# Plant Master™ Plus Hose
RECOMMENDED FOR: Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only.
– ARPM (Class B) Medium oil–resistant tube.
– ARPM (Class C) Limited oil–resistant cover.
– Air, water, and heat resistant.
## Features and Benefits
– Working pressure: 1,72 to 1,38 MPa
– Design factor: 3:1
– Sizes: 1/4″ to 2″
– Formerly: Duro Flex™
Additional information
| Vacuum (In. Hg) | 10 |
|---|---|
| Minimum Bend Radius (in) | 10 |
| Minimum Bend Radius (mm) | 254 |
| Inside Diameter (in) | 1.33 |
| Inside Diameter (mm) | 33.8 |
| Temperature Range | -40°F to +200°F (-40°C to +93°C) |
| Working Pressure (psi) | 250 |
| Length (m) | 91.4 |
| Outside Diameter (in) | 1.57 |
| Outside Diameter (mm) | 33.8 |
| Coupling Recommendation | Power Crimp™ Couplings. GLX® Couplings [G44 Series]. |
| Color | Black |
| Cover | EPDM – Type P. |
| Reinforcement | Synthetic textile |
| Tube | Specially compounded elastomer – Type B1. Medium oil resistance., EPDM – Type P. Limited oil resistance., Nitrile – Type C. High oil resistance. |
| Construction: Cover | EPDM – Type P |
| Construction: Design Factor | 3:1 |
| Construction: Reinforcement | Synthetic textile |
| Construction: Tube | EPDM – Type P. Black. Limited oil resistance |
| Standards: Cover | ARPM Class C |
| Standards: Tube | ARPM Class C |
| Continuous Operating Temperature Range | -40°F to +200°F, -20°F to +212°F |
| Min. Burst Pressure (psi) | 600 – 1200 |
| Hose Inside Diameter (in). | 0.25 – 2 |
| Hose Inside Diameter (mm) | 6.4 – 50.8 |
| Hose Outside Diameter (in) | 0.5 – 2.56 |
| Hose Outside Diameter (mm) | 12.7 – 65 |
| Use | Industrial Hose |
| Notes | NOTE: Pkg Code T = One piece continuous length reel. Pkg Code XX = Two piece reel, 50 ft increments, no length less than 50 ft. |
| Recommended For | Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only., Air, water, oils, antifreeze solutions and applications where Lock-On fittings are used. |
| Customer Pack | 100 – 600 |
| Weight (lbs.) | 0.09 – 1.32 |
| Standards | Non-conductive (>1 Megohm/in.). Storage and use may adversely affect electrical resistance. |
| Caution | Hose is not recommended for applications where vibrations or pressure surges exist. Do not use oil for Lock-On fitting insertion purposes. Not recommended for gasoline or diesel fuels. |
