Gates / General Purpose / 205MB BLACKXCTN1 1/2

205MB BLACKXCTN1 1/2

Product Code: 205MB BLACKXCTN1 1/2

Options

1-1/2X250' (250WP) ADAPTA BLK 1.33PM1100 1/4X500 PLANT+ 300 LOCKON RED 1/4X500 PLANT+ 300 LOCKON YEL 3/4X50 PLANT+ 250 4PM4001 4PM4010 4PM4100 4PM4160 4PM4161 4PM4162 4PM4163 6PM1502 6PM4001 6PM4010 6PM4100 6PM4110 6PM4160 6PM4161 6PM4162 6PM4163 6PM4164 6PM4165 6PM4166 6PM4167 6PM4168 6PM4169 8PM1102 8PM4000 8PM4001 8PM4010 8PM4100 8PM4101 8PM4110 8PM4160 8PM4162 8PM4163 8PM4164 10PM4000 10PM4100 12PM4001 12PM4010 12PM4100 12PM4110 16PM4000 16PM4010 20PM4000 22PM4000 24PM1102 24PM4000 24PM4001 24PM4002 24PM4003 24PM4104 32PM4000 32PM4001 205MB BLACKXCTN1 1/2 205MB BLACKXCTN2 3222-0145 32000105 32000311 32041638 36021053 36021063 36022123 36050670 36050680 36050692 36051408

Description

# Plant Master™ Plus Hose

RECOMMENDED FOR: Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only.

– ARPM (Class B) Medium oil–resistant tube.
– ARPM (Class C) Limited oil–resistant cover.
– Air, water, and heat resistant.

## Features and Benefits

– Working pressure: 1,72 to 1,38 MPa
– Design factor: 3:1
– Sizes: 1/4″ to 2″
– Formerly: Duro Flex™

Additional information

Vacuum (In. Hg)	4 – 30
Minimum Bend Radius (in)	2 – 17
Minimum Bend Radius (mm)	51 – 419
Inside Diameter (in)	0.25 – 2
Inside Diameter (mm)	6.4 – 50.8
Temperature Range	-40°F to +200°F (-40°C to +93°C), -20°F to +212°F (-29°C to +100°C)
Working Pressure (psi)	200 – 300
Length (m)	15.2 – 152.4
Outside Diameter (in)	0.5 – 2.56
Outside Diameter (mm)	6.4 – 50.8
Coupling Recommendation	Power Crimp™ Couplings. GLX® Couplings [G44 Series]., 19 Standard Air Hose. 1 Long Shank. 3 Cast Brass or Zinc Short Shank. 4 Machined Brass Short Shank. Power Crimp™ Couplings., GLX® Couplings [G44 Series]. Field Attachable LOC Couplings [G36 Series]., Power Crimp™ Couplings, GLX® Couplings [G44 Series], Power Crimp™ Couplings. GLX® Couplings [G44 Series]
Color	Red, Black, Green, Gray, Blue, Yellow, +1 more
Cover	EPDM – Type P., EPDM – Type P. Perforated., Modified Nitrile – Type C2., Chloroprene – Type A., EPDM – Type P
Reinforcement	Synthetic textile, Synthetic Textile
Tube	Specially compounded elastomer – Type B1. Medium oil resistance., EPDM – Type P. Limited oil resistance., Nitrile – Type C. High oil resistance.
Construction: Cover	EPDM – Type P, Chloroprene – Type A, Modified Nitrile – Type C2, Specially compounded elastomer – Type D3
Construction: Design Factor	3:1, 4:1
Construction: Reinforcement	Synthetic textile
Construction: Tube	Specially compounded elastomer – Type B1. Black. Medium oil resistance, EPDM – Type P. Black. Limited oil resistance, Nitrile – Type C. Black. High oil resistance
Standards: Cover	ARPM Class C, ARPM Class B
Standards: Tube	ARPM Class B, ARPM Class C, ARPM Class A
Continuous Operating Temperature Range	-40°F to +200°F, -20°F to +212°F
Min. Burst Pressure (psi)	600 – 1200
Hose Inside Diameter (in).	0.25 – 2
Hose Inside Diameter (mm)	6.4 – 50.8
Hose Outside Diameter (in)	0.5 – 2.56
Hose Outside Diameter (mm)	12.7 – 65
Use	Industrial Hose
Notes	NOTE: Pkg Code T = One piece continuous length reel. Pkg Code XX = Two piece reel, 50 ft increments, no length less than 50 ft.
Recommended For	Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only., Air, water, oils, antifreeze solutions and applications where Lock-On fittings are used.
Customer Pack	100 – 600
Weight (lbs.)	0.09 – 1.32
Standards	Non-conductive (>1 Megohm/in.). Storage and use may adversely affect electrical resistance.
Caution	Hose is not recommended for applications where vibrations or pressure surges exist. Do not use oil for Lock-On fitting insertion purposes. Not recommended for gasoline or diesel fuels.