41760024
Description
# Thick Wall Coolant Hose
RECOMMENDED FOR: Engine coolant hose such as radiator and heater hoses or connectors. Also suitable for air or water.
– CAUTION: Not for conveying fuel and oil.
– Heat and ozone resistant.
– Meets SAE 20R1 Class D2, heavy wall. Wall thickness is 6.45 +/– 0.65mm (0.255 +/– 0.25″) excluding lap area.
Additional information
| Vacuum (In. Hg) | 3 |
|---|---|
| Continuous Operating Temperature Range | -40°F to +257°F |
| Minimum Bend Radius (in) | 0 |
| Minimum Bend Radius (mm) | 0 |
| Hose Inside Diameter (in). | 2 – 4 |
| Hose Inside Diameter (mm) | 50.8 – 101.6 |
| Hose Outside Diameter (in) | 2.51 – 4.51 |
| Hose Outside Diameter (mm) | 63.8 – 114.6 |
| Inside Diameter (in) | 2 – 4 |
| Inside Diameter (mm) | 50.8 – 101.6 |
| Temperature Range | -40°F to +257°F (-40°C to +125°C) |
| Working Pressure (psi) | 38 – 88 |
| Length (m) | 15.2 |
| Outside Diameter (in) | 2.51 – 4.51 |
| Outside Diameter (mm) | 50.8 – 101.6 |
| Coupling Recommendation | 1 Long Shank. 5 Brass Pin Lug. 6 Malleable Iron Pin Lug. 7 Combination Nipple. |
| Color | Black |
| Cover | EPDM – Type P. Smooth. |
| Reinforcement | Multi-ply, synthetic textile |
| Tube | EPDM – Type P. Limited oil resistance. |
| Construction: Cover | EPDM – Type P |
| Construction: Design Factor | 4:1 |
| Construction: Reinforcement | Multi-ply, synthetic textile |
| Construction: Tube | EPDM – Type P. Black. Limited oil resistance |
| Standards | Meets SAE 20R1, Class D2. |
| Standards: Cover | ARPM Class C |
| Recommended For | Open-end heavy-duty water discharge applications and coolant connections on marine and stationary engines. |
| Couplings Note | Select Ind Hose Coupling Reference Sheet link below for additional information. |
| Customer Pack | 50 |
| Weight (lbs.) | 1.0 – 1.69 |
| Min. Burst Pressure (psi) | 150 – 250 |