G25300-1616X

Description
# MegaCrimp™ Couplings
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
– The ‘bite-the-wire’ design allows for coupling and hose retention to make a high performance, risk-free hydraulic hose assembly.
– Full-Torque Nut couplings are stronger and more durable than traditional staked nut fittings that are prone to cracking when over-torqued.
– The Full-Torque Nut transfers input-torque to clamp-load more consistently than staked nuts, minimizing leaks.
– MegaCrimp couplings allow you to simplify your inventory by carrying one family of couplings that are qualified on all Gates wire-braid hoses.
– Tested to one million impulse cycles, proving its high performance and maximum service.
## Features and Benefits
– One of the most common causes of hydraulic leaks is a cracked coupling nut or seat due to over-torquing by a strong-armed worker. Gates® has engineered a solution – Full-Torque Nut™ technology now available on Gates® MegaCrimp™ and GlobalSpiral™ couplings.
– MegaCrimp couplings set a new standard for hydraulic couplings. The unique “C” insert ensures “weep-free” concentric crimping to keep equipment and the environment clean.
– Surpassed one million impulse cycles during design testing.
Additional information
| H1 Stem Hex (in) | 1.18, 1.181, 1.06, 1.063, 1.26, 0.95, +45 more |
|---|---|
| H1 Stem Hex (mm) | 11.11 – 50 |
| T1 Thread (in) | 1-14, 7/8-14, 1 1/16-12, 3/4-16, 5/8-14, 1" – 14 UNS, +80 more |
| L Length (in) | 4.134 |
| L Length (mm) | 105 |
| Hose Inside Diameter (in) | 1 |
| Hose Inside Diameter (mm) | 25.4 |
| Inside Diameter (in) | 1 |
| Inside Diameter (mm) | 25.4 |
| L (in) | 4.13 |
| Material | Steel |
| Customer Pack | 30 |
| Weight (lbs.) | 1.23 |
| T2 Thread (in) | 1" – 14 UNS, 7/8" – 14 UNF, 1.1/16" – 12 UN, 3/4" – 16 UN, 1.3/16" – 12 UN, 1.5/16" – 12 UN, +4 more |
| H2 Nut Hex (in) | 0.38 – 2.362 |
| H2 Nut Hex (mm) | 9.5 – 60 |
| C Cutoff (in) | 1.898 |
| C Cutoff (mm) | 48.2 |
| C (in) | 1.9 |
| Notes | Includes O-Ring sealing in flare., SAE J1453 O-Ring Face Seal., These female swivels have been marked with two small notches on the hex to identify them as the Komatsu style., SAE J1926/3 ISO 11926-3 Light-Duty (L Series) Stud End., NOTE: Internal O-Rings rated at +250°F (+121°C). NOT TO BE USED AS A LIVE SWIVEL. SAE J1926/3 ISO 11926-3 Light-Duty (L Series) Stud End., SAE J1453 Captive O-Ring Groove for Improved O-Ring Retention., +6 more |
| T Drop (in) | 0.157 – 7.1 |
| Angle. | 22.5 – 180 |
| F Flange Head Thickness (in) | 0.32 |
| F Flange Head Thickness (mm) | 8.1 |
| M Flange Diameter (in) | 1.75 |
| M Flange Diameter (mm) | 44.5 |
| A1 Outside Diameter (in) | 0.236 – 1.5 |
| A1 Outside Diameter (mm) | 6 – 38.1 |
| A1 Tube Outside Diameter (mm) | 6 – 38 |
| B Tube Length (in) | 0.87 – 1 |
| B Tube Length (mm) | 22 – 25.4 |
| BH Bolt Hole (mm) | 13.2 – 16.8 |
| A1 Tube Outside Diameter (in) | 3/8, 1/2 |